E-pos: [email protected]
XSD sandwasser
XSD Sand Washer is algemeen bekend as wiel-emmer tipe sandwasser. Dit word ontwikkel en vervaardig deur SBM deur binnelandse en oorsese gevorderde tegnologieë aan te neem en die werklike situasie van die binnelandse aggregaatbedryf te kombineer. It is usually used with the sand maker.
Produk Funksies: Simple structure, low failure rate, big capacity and high cleanliness
- Invoergrootte: 0-10mm
- Kapasiteit: 20-120TPH
- Materiaal: Graniet, marmer, basalt, kalksteen, kwarts, klippie, kopererts, iron ore and so on
Optrede
Large Capacity & Low Production Cost
The capacity of a XSD Sand Washer can reach 180t/h, which satisfies most sand washing requirements. The sand-washer is of small investment and low power consumption. And it can save a lot of production cost.
Simple Structure & Low Failure Rate
The XSD Sand Washer is of simple and reasonable structure. The impeller drive bearing device is separated from the water and materials exposed to water. The new sealing structure and totally enclosed oil bath-type transmission device greatly avoid the occurrence of bearing damages caused by water soaking, sand and pollutants.
Multiple Functions—Washing, Dewatering And Grading
The XSD Sand Washer possesses washing, dewatering and grading functions. When working, the aggregate will grind mutually under the driving of impeller to remove the sundries covering on the aggregate surfaces and destroy the water vapor layer covering the sand. The XSD Sand Washer can also complete the washing and purifying functions under the effect of strong water flow.
Long Service Life & No Pollution
XSD Sand Maker has good structural layout and effective sealing design, allowing it to operate for a long term without maintenance (m.a.w., it is durable.). The water consumption is low and the operating noise is small which meet the national environmental protection standards.
Digitized Machining, Hoër presisie
SBM has dozens of CNC (Computer numerical control) machine production lines. From steel plates’ sny, buig, planning to final painting, all steps can be controlled numerically. High processing precision assures that key parts have higher standards.
Sufficient Spare Part Supply, Worriless Operation
SBM, as a prominent enterprise integrating machine production and sales in mining machinery industry, is dedicated to be responsible for every product. Intussen, SBM always makes every effort to offer customers comprehensive technical services and sufficient spare parts to let them be free from worries about project operation.
Werksbeginsel
When a XSD Sand Washer is working, aangedryf deur die motor, the impeller starts to rotate slowly under the coordinated action of triangular belt, reducer and gear. Sands and gravels enter the wash trough along with the feed trough where they, under the action of impeller, roll over and grind each other to remove impurities on the surface and to destroy the water vapor layer covering sands to facilitate dehydration. At the same time, add water to form a strong water flow to rinse away impurities and foreign matters. Clean sands and gravels are taken away by blades of the impeller and then poured into the discharge trough from the rotating impeller. This is the whole process of sand washing.
Produk Parameters
| Model | Size of impeller (mm) | Maximum feed size (mm) | Kapasiteit (t/h) | Spoed (rpm) | Krag (kW) | Algehele dimensie (mm) |
| XSD2610 | Φ2600×1000 | ≤10 | 20-60 | 1.178 | 7.5 | 3255×1982×2690 |
| XSD3016 | Φ3000×1600 | ≤10 | 70-120 | 1.179 | 15 | 3845×3000×3080 |
Let wel:
Produkfoto's en parameters oor modelle, data, prestasies en spesifikasies op hierdie webwerf is slegs vir verwysing. Daar is 'n kans dat SBM veranderinge aan bogenoemde inligting kan maak. Vir spesifieke boodskappe, verwys asseblief na die regte voorwerpe en gebruikershandleidings. Sonder spesiale instruksies, SBM behou die reg om alle data betrokke by hierdie webwerf te verduidelik.