VSI Sand Maker

VSI Vertical-shaft Sand Maker is commonly known as the impact crusher or aggregate shaper. VSI Sand Maker is the fourth generation of high-performance sand-making machine developed by SBM on the basis of introducing advanced German technologies about sand makers and analyzing domestic situations of mining industry. Taking VSI Sand Maker as the prototype, SBM has pushed out upgraded VSI5X Sand Maker and VSI6X Sand Maker successively.

ویژگی های محصول: Lower maintenance costs, longer service life of vulnerable parts, quicker adjustments

• اندازه ورودی: 0-50میلی متر
• ظرفیت: 60-520TPH
• مواد: سنگ گرانیت, quartz, بازالت, pebble, سنگ آهک, دولومیت, و غیره.

عملکرد

اصل کار

VSI Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” و “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. بعد, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. سرانجام, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. سپس, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. بعد, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. سرانجام, finished products are discharged from the bottom discharge opening.

پارامترهای محصول

توجه داشته باشید:

تصاویر محصول و پارامترهای مربوط به مدل ها, داده ها, اجراها و مشخصات موجود در این وب سایت فقط برای مرجع است. این احتمال وجود دارد که SBM ممکن است تغییراتی در اطلاعات ذکر شده در بالا ایجاد کند. برای پیام های خاص, لطفاً به کتابچه راهنمای کاربر و اشیاء واقعی مراجعه کنید. بدون دستورالعمل خاص, SBM این حق را برای خود محفوظ می دارد که تمام داده های مربوط به این وب سایت را توضیح دهد.