پست الکترونیک: [email protected]
VSI5X Sand Making Machine
On the basis of introducing German technologies on sand-making machines and upgrading the VSI Sand Maker, SBM develops and researches a new generation of sand-making machine— VSI5X Sand Maker. VSI5X sand making machine has multiple independent property rights and integrates 3 kinds of crushing modes. Now, VSI5X sand Maker is the core equipment in machine-made sand industry.
ویژگی های محصول: Lower maintenance costs, longer service life of vulnerable parts, quicker adjustments
- اندازه ورودی: 0-50میلی متر
- ظرفیت: 70-640TPH
- مواد: سنگ گرانیت, quartz, بازالت, pebble, سنگ آهک, دولومیت, و غیره.
عملکرد
Optimized Impeller Enhances Efficiency By 30% And Reduces Wear By 40%
Through systematic mechanical analysis and verification, SBM optimized the structures of impeller and vulnerable parts. Compared with the traditional sand makers, VSI5X Sand Maker obviously increases the material throughput and ratio of crushing, and enhances the working efficiency by 30%-60%. The wear costs of vulnerable parts reduce by more than 40%.
Hydraulic Device to Open the Cover Automatically Reduces Maintenance Costs
In consideration of the maintenance and part replacement during the production of the sand maker, SBM introduced semi-automatic hydraulic system. By only pressing a button, users can open the top cover of the machine to carry out following operations. So, this system greatly saves labor costs and enhances the service efficiency.
Split-Type Structure, Extended Service Life of Spare Parts
Based on the actual situations of production, we found that some spare parts like the periphery guard board and impact block always wear terribly at some specific points. So, to avoid this phenomenon, SBM adopts the split-type structure when designing quick-wear parts, which not only greatly extends service life of quick-wear parts, but also reduces their using costs a lot.
Brand New Feed Mode
In consideration that customers may have two production demands (یعنی. sand making and shaping) which require the switch between central feeding and fall feeding, SBM made a brand new improved design on the material distributing tray so that users can easily switch the feed mode, shortening downtime for adjustments.
پردازش دیجیتالی شده, دقت بالاتر
ده ها خط ماشین ابزار کنترل عددی وجود دارد. عملیاتی مانند صفحات فولادی’ برش دادن, خم شدن, برنامه ریزی, فرز و پاشش رنگ همگی به صورت عددی کنترل می شوند. دقت ماشینکاری بالاست, مخصوصا برای قطعات اصلی.
Sufficient Supply of Spare Parts, Worry-free Operation
SBM, که تجارت آن تولید و فروش را پوشش می دهد, مسئولیت هر ماشینی که توسط خودمان تولید می شود را بر عهده می گیرد. ما می توانیم به مشتریان خدمات فنی در مورد محصولات و قطعات یدکی اصلی ارائه دهیم تا از عملکرد بدون نگرانی اطمینان حاصل کنیم.
اصل کار
VSI5X Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” و “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. بعد, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. سرانجام, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. سپس, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. بعد, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. سرانجام, finished products are discharged from the bottom discharge opening.
پارامترهای محصول
| مدل | Soft material | Hard material | Side and central feeding | Fully central feeding | Speed (دور در دقیقه) | قدرت (کیلووات) | ابعاد کلی (میلی متر) |
| حداکثر اندازه تغذیه (میلی متر) | Throughput (t/h) | ||||||
| VSI5X1145 | 50 | 45 | 500-640 | 250-360 | 1100-1310 | 220×2 | 5000×2790×3320 |
| VSI5X9532 | 45 | 40 | 350-540 | 180-280 | 1300-1510 | 160×2 | 4560×2600×2900 |
| VSI5X8522 | 40 | 35 | 240-380 | 120-190 | 1500-1700 | 110×2 | 4140×2500×2700 |
| VSI5X7615 | 35 | 30 | 150-280 | 70-140 | 1700-1900 | 75×2 | 4100×2330×2300 |
توجه داشته باشید:
تصاویر محصول و پارامترهای مربوط به مدل ها, داده ها, اجراها و مشخصات موجود در این وب سایت فقط برای مرجع است. این احتمال وجود دارد که SBM ممکن است تغییراتی در اطلاعات ذکر شده در بالا ایجاد کند. برای پیام های خاص, لطفاً به کتابچه راهنمای کاربر و اشیاء واقعی مراجعه کنید. بدون دستورالعمل خاص, SBM این حق را برای خود محفوظ می دارد که تمام داده های مربوط به این وب سایت را توضیح دهد.