Ашигласан vs шинэ эрүүний бутлуур: Ухаалаг худалдан авагчдын зардлын тэтгэмжийн дүн шинжилгээ

2. Efficiency Paradox: When Older Models Outperform

Surprisingly, certain used crushers achieve 92-95% of newsmall mining crushers efficiency if:

• Originalliners were replaced ≤500 operating hours
• Previous owner maintained proper CSS adjustments
• No history of tramp metal damage

Case study: A Zambian copper mine achieved 290 tph with a 2019 C6X110 vs 305 tph for a 2024 загвар.

3. Maintenance Cost Multiplier Effect

Used equipment maintenance costs escalate non-linearly:

Year 1: $15k (expected)
Year 2: $28k (bearing failure)
Year 3: $41k (eccentric shaft replacement)

New crushers benefit from:

• 5-year warranty coverage (saving $120k+)
• Predictive maintenance sensors
• Latestproblem prevention designs

4. Residual Value Calculus

Depreciation patterns differ radically:

• Шинэ: 15% annual depreciation (Year 1-5)
• Used: 28% annual depreciation (Year 6-10)

A 2025 model retains 45% value after 5 years vs 12% for a 2020 unit.

5. Risk-Weighted ROI Formula

Use this modified CBA equation for crushers:

Net Benefit = (Production Value + Residual) - (Purchase + ΣRepairs + Downtime Losses)

Sample calculation for granite quarry:

The Decision Matrix: When to Choose Used

Used crushers make sense only if:

1. Operational lifespan needed <3 жил
2. Processing non-abrasive materials (e.g., шохойн чулуу)
3. Full maintenance history available
4. Spare parts inventory on-site

Beyond Simple Math

While newхацарт бутлуур show 22% better 10-year ROI in our models, strategic used purchases can work for short-term projects with tight budgets. Always:

• Require OEM inspection reports
• Calculate production loss risks
• Compare liner wear patterns againstreplacement benchmarks

Rational Choice Of Cost-effectiveness Of Used And New Jaw Crushers

Comparing used vs new jaw crushers through cost-effectiveness analysis, the data shows that there are significant differences in the applicable scenarios of the two. Although new equipment has to bear 300% of the initial cost (average $300,000 тэтгэвэр $120,000 second-hand price), its total cost of ownership over five years is only 17% higher ($344,000 тэтгэвэр $293,000), which is attributed to:

• Maintenance cost difference: New equipment has an average annual maintenance cost of 62% lower ($8,000 тэтгэвэр $21,000)
• Productivity advantage: New equipment has 50% higher production capacity (1.8M tons vs 1.2M tons/5 years)
• Residual value protection: After five years, the residual value retention rate of new equipment is 45%, while that of old equipment is only 12%

Гэсэн хэдий ч, second-hand crushers are still competitive in certain scenarios: short-term projects (<3 жил), non-abrasive material processing (шохойн чулуу гэх мэт), and the need for complete maintenance records and spare parts inventory. Тиймээс, key decisions should be based on therisk-weighted ROI formula, taking into account the risk of production loss and hidden repair costs (68% of second-hand equipment requires $20,000+ for emergency repairs). Товчхондоо, rational choices need to balance initial capital pressure with long-term operational stability, and verify the equipment status through OEM test reports.