ईमेल: [email protected]
एससीएम अल्ट्राफाइन ग्राइंडिंग मिल
SCM Ultrafine Grinding Mill is a new superfine powder (325-2500 mesh) production equipment developed through accumulating years of experience in grinding mill production, absorbing Swedish advanced machine manufacturing technology, and undergoing many years of tests and improvements. The SCM Ultrafine Grinding Mill is the result of combination of advanced Chinese and Swedish technologies. दरम्यान, it symbolizes the new development and new science in the grinding world.
उत्पादन वैशिष्ट्ये: Ultrafine powder, wide applications, excellent environmental effect
- इनपुट आकार: 0-20मिमी
- क्षमता: 0.5-25TPH
- साहित्य: चुनखडी, कॅल्साइट, डोलोमाइट, petroleum coal, जिप्सम, barite, संगमरवरी, talc, coal powder, etc.
कामगिरी
Higher Yielding, Lower Energy Consumption
Newly designed grinding curves of grinding roller and grinding ring further enhance the grinding efficiency of SCM Ultrafine Grinding Mill. With the same fineness and power, the production capacity is 40% higher than that of jet grinding mill and stirred grinding mill, and the yield is twice as large as that of ball grinding mill. तथापि, the system energy consumption is only 30% of the jet grinding mill.
Adjustable Fineness Between 325-2500meshes
SCM Ultrafine Grinding Mill’s cage-type powder selector adopts German technologies, which effectively increases the precision of powder separation. याव्यतिरिक्त, multi-head cage-type powder selector can be configured according to the users’ requirements on yield, fineness and sieving rate. The product fineness can be adjusted between 325-2500 meshes, and the screening rate can achieve d97≤5μm once.
No Rolling Bearing & Screw in Grinding Chamber
There is no rolling bearing and screw inside the chamber of SCM Ultrafine Grinding Mill, so users are free from worries about damages on bearing or its sealing parts, and there is no machine damage problem caused by loose screws. The lubricating device is installed outside of the main shaft, so that lubrication without shutdown can be realized externally, and the production can be continued for 24h.
Dust Removal by Pulse Collector Makes Operation More Eco-friendly
SCM Ultrafine Grinding Mill is equipped with efficient pulse dust collector, so no dust pollution generates during operation of the entire milling system. Silencer and noise elimination room are configured to reduce noises. The production is organized fully according to the national environmental protection standards.
Digitalized Processing, उच्च अचूकता
There are tens of lines of numerical controlling machine tools. Operations such as steel plates’ कटिंग, वाकणे, planing, milling and paint spraying are all controlled numerically. The machining precision is high, especially for the core parts.
Sufficient Supply of Spare Parts, Worry-free Operation
SBM, whose businesses cover production and sales, takes responsibility for every machine produced by ourselves. We can offer customers technical services about products and original spare parts to ensure the worry-free operation.
कार्य तत्त्व
After hammer crushers break large bulky materials to smaller ones, elevator works to send materials to material bin. Next, materials are sent to the grinding mill evenly and they would fall onto the dispersing plate firstly. When the grinding mill runs, dozens of grinding rollers start to rotate and roll. Under the action of centrifugal force, materials on the dispersing plate are then thrown to the rim and drop to the grinding chamber. In the circuit, materials would be squeezed and ground. After being ground several times, materials are blown into the powder selector by airflow. Under the action of the impeller of powder selector, materials which fail to meet fineness would be sent back to grinding chamber to get another grinding while qualified powders would be collected by cyclone powder collector and discharged from the bottom as finished products. Some remaining powders would be collected by impulse dust remover and they may stick to the surface of filler-bag. तर, next, high-pressure airflow controlled by the impulse valve blows the filler-bag to make it swell and shake violently. This sudden shake can help kick off materials on the filler-bag and collect them as finished products. After filtering, the airflow would be discharged to the air. This system adopts an open circuit and runs under negative pressure.
उत्पादन पॅरामीटर्स
| मॉडेल | SCM800 | SCM900 | SCM1000 | SCM1250 | SCM1680 |
| Working diameter (मिमी) | Φ800 | Φ900 | Φ1000 | Φ1250 | Φ1680 |
| Max feed size (मिमी) | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 |
| Final size (mesh) | 325-2500 | 325-2500 | 325-2500 | 325-2500 | 325-2500 |
| Output (kgh) | 500-4500 | 800-6500 | 1000-8500 | 2500-14000 | 5000-25000 |
| मॉडेल | SCM800 | SCM900 | SCM1000 | SCM1250 | SCM1680 | |
| Main motor | शक्ती | 75 | 45×2 | 132 | 185 | 315 |
| Analytical engine (FM motor) | शक्ती | 18.5 | 18.5 | 30 | 15×4 | 18.5×5 |
| Blower motor | शक्ती | 45 | 55 | 75 | 55×2 | 90×2 |
| क्रशर | मॉडेल | PC400×600 | PC400×600 | PC400×600 | PC600×800 | PC600×800 |
| शक्ती | 18.5 | 18.5 | 18.5 | 45 | 45 | |
| Elevator | मॉडेल | TH-200 | TH-200 | TH-300 | TH-300 | TH-300 |
| शक्ती | 3 | 3 | 4 | 5.5 | 7.5 | |
| कंपन करणारा फीडर | मॉडेल | 300×60×1.8 Φ159-1.8 | 300×60×1.8 Φ159-1.8 | 300×60×1.8 Φ159-1.8 | 400×80×2 Φ219-2 | 400×80×2.8 |
| शक्ती | 1.5/3 | 1.5/3 | 1.5/3 | 1.5/3 | 2.2 | |
| Discharge screw conveyor | मॉडेल | LS219-4.5/LS219-3 | LS219-5.8 | LS219-6.9/LS219-5 | LS219-5 | LS273-8.6 |
| शक्ती | 3 | 3 | 4 | 3×2 | 5.5×2 | |
| Discharge valve | मॉडेल | ZJD-200 | ZJD-200 ZJD-250 | ZJD-200 ZJD-250 | ZJD-250 | ZJD-300 ZJD-200 |
| शक्ती | 0.75 | 0.75 + 1.1 | 0.75+ 1.1 | 1.1 | 1.5+0.75 | |
| Pulse dust collectors | मॉडेल | DMC120/DMC16 | DMC16 | LDMC25 | LDMC45 | LDMC400×2 |
| Air compressor | मॉडेल | KSH150D/LG1.5-8 | KSH240D/LG2.4-8 | KSH300D/LG3.6-8 | LG6.2-8 | LG10-8 |
| शक्ती | 11 | 15 | 22 | 37 | 55 | |