ईमेल: [email protected]
VSI6X वाळू बनवण्याचे यंत्र
Due to the increasing market demand for the scale, intensification, energy conservation, environment protection and high-quality machine-made sand, SBM, a Chinese professional sand making machine manufacturer, further optimizes the structure and function of traditional vertical-shaft impact crushers and launches a new generation of sand-making and reshaping machine with high efficiency and low costs — VSI6X वाळू बनवण्याचे यंत्र.
उत्पादन वैशिष्ट्ये: Lower maintenance costs, longer service life of vulnerable parts, bigger capacity
- इनपुट आकार: 0-50मिमी
- क्षमता: 100-583TPH
- साहित्य: ग्रॅनाइट, क्वार्ट्ज, बेसाल्ट, खडे, चुनखडी, डोलोमाइट, etc.
कामगिरी
“Rock On Rock” And “Rock On Iron” Crushing
In order to meet the crushing demand of different customers, VSI6X Sand Making Machine takes two crushing methods— “rock on rock” आणि “rock on iron”(which refer to “rock hitting rock” आणि “rock hitting iron” respectively). The material liner of “rock on rock” and counter block structure of “rock on iron” are designed specially according to the working condition of the sand-making machine, which greatly promotes the crushing ratio of the sand maker.
New Structural Designs of Key Parts
In order to ensure the overall performance of the sand making machine, key parts on it is optimized on their structures, such as the impeller, the bearing cylinder and the main body. Several national patent technologies SBM owns ensure the high yield, high efficiency and low cost of the crushing machines in crushing operation.
Lower Costs in Usage and Maintenance
VSI6X Sand Making Machine is optimized on some structures and crafts of the impeller. The service life of some wearing parts is prolonged by 30~200% compared to the previous crushing machines under the same usage conditions. VSI6X Vertical-shaft Sand Maker is configured with simple lifting device. When the sand maker needs maintenance, the lifting of the impeller and the bearing cylinder needs no extra-large lifting devices, greatly lowering the maintenance difficulty of the sand maker.
Safer and More Reliable Operation
When designing this sand making machine, the safety and reliability are taken into consideration. The more stable and reliable dual-motor drive and automatic diluted oil lubrication are adopted and at the same time, the gunk and the maintenance platform are optimized to ensure the safety and reliability of operation.
Digitalized Processing, उच्च अचूकता
There are tens of lines of numerical controlling machine tools. Operations such as steel plates’ कटिंग, वाकणे, planing, milling and paint spraying are all controlled numerically. The machining precision is high, especially for the core parts.
Sufficient Supply of Spare Parts, Worry-free Operation
SBM, whose businesses cover production and sales, takes responsibility for every machine produced by ourselves. We can offer customers technical services about products and original spare parts to ensure the worry-free operation.
कार्य तत्त्व
VSI6X वाळू बनवण्याचे यंत्र (also known as “Sand Maker”) has two feed modes – “feed at center” आणि “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Next, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. शेवटी, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. मग, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Next, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. शेवटी, finished products are discharged from the bottom discharge opening.
उत्पादन पॅरामीटर्स
| मॉडेल | Sanding making | Reshaping | Sanding making | Reshaping | गती (आरपीएम) | शक्ती (kW) | एकूण परिमाण (मिमी) |
| Maximum feeding size (मिमी) | Throughput (टी/ता) | ||||||
| VSI6X8015 | 30 | 40 | 109-117 | 131-214 | 1300-1700 | 75×2 | 4100×2300×2750 |
| VSI6X9026 | 35 | 45 | 167-179 | 200-313 | 1200-1500 | 132×2 | 4200×2400×3150 |
| VSI6X1040 | 40 | 50 | 264-283 | 317-495 | 1100-1400 | 200×2 | 4880×2560×3725 |
| VSI6X1150 | 45 | 55 | 344-368 | 413-644 | 1000-1300 | 250×2 | 5500×2750×3950 |
| VSI6X1263 | 50 | 60 | 454-486 | 545-849 | 900-1200 | 315×2 | 5700×2980×4190 |
| VSI6X1380 | 50 | 60 | 601-643 | 721-1125 | 800-1100 | 400×2 | 7900×3260×4183 |
| VSI6X13100 | 50 | 60 | 751-804 | 940-1407 | 800-1100 | 500×2 | 7900×3260×4183 |
नोंद:
मॉडेल्सबद्दल उत्पादनाची चित्रे आणि पॅरामीटर्स, डेटा, या वेबसाइटवरील कामगिरी आणि तपशील केवळ संदर्भासाठी आहेत. SBM वर नमूद केलेल्या माहितीमध्ये बदल करू शकेल अशी शक्यता आहे. विशिष्ट संदेशांसाठी, कृपया वास्तविक वस्तू आणि वापरकर्ता पुस्तिका पहा. विशेष निर्देशांशिवाय, या वेबसाइटमध्ये समाविष्ट असलेल्या सर्व डेटाचे स्पष्टीकरण देण्याचा अधिकार एसबीएमकडे आहे.