LM Dikey Öğütme Değirmeni

Ev » Ürünler » LM Dikey Öğütme Değirmeni

Based on the absorption of advanced technologies of famous international corporations and 30 years’ experience in grinding mill production, SBM has launched the LM Vertical Grinding Mill which integrates five functions of crushing, bileme, powder selection, drying and material conveying. It is characterized by centralized technological process, small occupational area, low investment, yüksek verim, energy conservation and environment protection.

Ürün Özellikleri: Integration of multiple functions, more stable and reliable production and more excellent capacity

Giriş Boyutu: 0-70mm
Kapasite: 3-340TPH
Malzeme: kireçtaşı, kalsit, dolomit, petrol kömürü, alçıtaşı, barit, mermer, talk, kömür tozu, vesaire.

Çevrimiçi sohbet

Verim

Less Comprehensive Investment

LM Vertical Grinding Mill integrates crushing, drying, bileme, separating and transport. The structure is simple while the layout is compact. Its occupational area is about 50% of that of the ball-milling system. The LM grinding mill can also be arranged outdoors, which greatly reduces the investment cost.

Comprehensive Optimization, Lower Operating Costs

From aspects of grinding efficiency, powder drying, abrasion of vulnerable parts and maintenance & replacement of spare parts, SBM’s LM Vertical Grinding Mill achieves lower energy consumption, stronger drying capacity, as well as lower abrasion and easier checks of core parts, saving the operating costs greatly.

Short Grinding Time & Low Iron Content

The materials linger in the grinding mill for a short time, which can reduce repeated grinding and is easy to detect and control the grain size and chemical component of the product. Ek olarak, the grinding roller and millstone do not contact directly. The iron content in the product is very low, and the iron generated due to mechanical wear is easy to be removed, thus effectively guaranteeing the whiteness and purity of the material.

Greener & More Automated

The operation of LM grinding mill is stable and has small vibration, so that the noise is small. The system is sealed in an integral manner and works under negative pressure, so that there is no dust spilling and the environment can keep clean with the emission standard far better than the international standard. LM grinding mill is also equipped with expert-level automatic control system, which can realize free switch between remote control and local control. The operations are simple and labor-saving.

Dijitalleştirilmiş İşleme, Daha Yüksek Hassasiyet

Onlarca satır sayısal kontrollü takım tezgahı var. Çelik levhalar gibi işlemler’ kesme, bükme, planlama, frezeleme ve boya püskürtme işlemlerinin tümü sayısal olarak kontrol edilir. İşleme hassasiyeti yüksektir, özellikle çekirdek parçalar için.

Yeterli Yedek Parça Temini, Sorunsuz Çalışma

SBM, İşletmeleri üretim ve satışı kapsayan, Kendi ürettiğimiz her makinenin sorumluluğunu alır. Sorunsuz çalışmayı sağlamak için müşterilerimize ürünler ve orijinal yedek parçalar hakkında teknik hizmetler sunabiliriz..

Çalışma prensibi

The grinding plate rotates under the action of main motor of LM Vertical Grinding Mill and the reducer. Bu sırada, hot wind enters the vertical mill. After raw materials fall onto the center of grinding plate, they move to the edge of grinding plate under the action of centrifugal force. While passing through the grinding area between roller and grinding plate, bulky materials are broken directly by the pressure of roller while fine materials form a layer where materials crush each other. Broken materials after grinding continue moving to the edge of grinding plate until they are brought away by the airflow at the air ring. For coarse materials which cannot be brought away would fall onto the grinding plate for another grinding. When passing the upper separator, materials in the air flow will be divided into two parts by the blades of rotor, that is, coarse particles and fine powders. Coarse particles would be sent back to have another grinding while the qualified fine powders enter the powder collector with airflow as finished products. For sundries like iron block in materials, when they move to the fringe of grinding plate, because of their heavier weight, they would drop to the lower cavity of grinding mill and next be sent into the discharging port by scarper installed at the bottom of grinding plate and finally be discharged out of the grinding mill.

Ürün parametreleri

Vertical Mineral Mill Series

Models and parameters		Vertical Mineral Mill Series
Models and parameters		LM130K	LM150K	LM170K	LM190K	LM220K	LM280K
Plate diameter (mm)		1300	1500	1700	1900	2200	2800
Kapasite (t/h)		10-28	13-38	18-48	23-68	36-105	50-170
Output fineness	μm	170-40	170-40	170-40	170-40	170-45	170-45
Output fineness	ağ	80-400	80-400	80-400	80-400	80-325	80-325
Max feed size(mm)		<38	<40	<42	<45	<50	<50
Ana motor (kW)		200	280	400	500	800	1250

Vertical Coal Mill Series

Models and parameters	LM80M	LM110M	LM130M	LM150M	LM170M	LM190M	LM220M	LM240M	LM280M
Plate diameter (mm)	800	1100	1300	1500	1700	1900	2200	2400	2800
Grinding roller (piece)	2	2	2	2	2	2	2	3	3
Kapasite (t/h)	3~5	5~9	10~17	16~22	20~30	26~40	35~50	50~65	60~90
Coal powder fineness (R0.08mm)	5~20%	5~20%	5~20%	5~20%	5~20%	5~20%	5~20%	5~20%	5~20%
Max feed size(mm)	<30	<30	<38	<40	<42	<45	<50	<50	<50
Ana motor (kW)	55	110	185	250	315	400	500	710	900

Vertical Slag Mill Series

Models and parameters	LM130N	LM150N	LM170N	LM190N	LM220N	LM280N	LM370N
OD of Turnplate(mm)	1700	1900	2100	2400	2800	3500	4500
Moisture of Scoria	＜15%
Output fineness	Specific Surface Area≥420m²/kg
Moisture of Powder	≤1%
Kapasite (t/h)	4~6	6~8	8~10	10~12	20~26	50~60	90~110
Ana motor (kW)	200–250	280–315	400–450	500–560	900–1000	1800–2000	3150–3300

NOTE: The Bond Index of scoria is ≤23kWh/t, and the iron content is ≤1%.

Vertical Fine-powder Mill Series

Models and parameters	LM130X-GX	LM150X-GX	LM170X-GX	LM190X-GX	LM220X-GX
Plate diameter (mm)	1300	1500	1700	1900	2200
Grinding roller (piece)	3	3	3	3	3
Max feed size(mm)	10	20	20	20	20
Output fineness (D97)	325~600 mesh	325~600 mesh	325~600 mesh	325~600 mesh	325~600 mesh
Kapasite (t/h)	4~12	6~14	8~20	13~26	15~30
Powder classifier (kW)	45	55	75	90	110
Ana motor (kW)	220	280	400	500	560

Vertical Pre-grinding Mill Series

Models and parameters	LM150Y	LM170Y	LM190Y	LM250Y	LM340Y
Plate diameter (mm)	1500	1700	1900	2500	3400
Grinding roller (piece)	2	2	2	3	3
Max feed size(mm)	20	20	20	20	20
Feed Capacity (t)	15~25	25~40	35~50	80~120	200~250
Output fineness 1 (R0.08mm)	≤15%	≤15%	≤15%	≤15%	≤15%
Output capacity 1 (t/h)	6~10	10~16	14~20	32~48	80~100
Output fineness 2 (R0.2mm)	≤5%	≤5%	≤5%	≤5%	≤5%
Output capacity 2 (t/h)	9~15	15~24	21~30	48~72	120~150
Mill cycle throughput (t/h)	60~100	100~160	140-200	320-480	800-1000
Ana motor (kW)	280	450	560	1400	2500

Not:

Modellerle ilgili ürün resimleri ve parametreler, veri, Bu web sitesindeki performanslar ve teknik özellikler yalnızca referans amaçlıdır. SBM'nin yukarıda belirtilen bilgiler üzerinde değişiklik yapma ihtimali vardır. Belirli mesajlar için, lütfen gerçek nesnelere ve kullanım kılavuzlarına bakın. Özel talimatlar olmadan, SBM bu web sitesinde yer alan tüm verileri açıklama hakkını saklı tutar.